How to prepare SD cards for the AppleIISd

Here is how to prepare SD cards for use with my AppleIISd. Please be aware, that the AppleIISd does not use the FAT format like other SD or CF storage solutions does, it uses the ProDOS format directly. This means that you can not simply take a ProDOS image and drop it to the card in the Windows Explorer, it has to be written using CiderPress.

1. Open CiderPress in Admin mode (Right-click on Icon, "Open as Administrator").
2. Select "Volume copier" from the icon bar or select "Tools -> Volume copier (open volume)" from the menu.
3. Make sure that "Open as read-only" is deselected. Select the SD card's logical volume from the list. Triple check that you have selected the correct volume and don't come crying when your PC has only a ProDOS volume left to boot 😉


4. When you open an SD card for the first time like this it might show an MS-DOS volume with SD card's size. This gives you an opportunity to check again! Select the volume and click "Load from file" to copy a ProDOS image file to the card.


5. The list will now display a partition map of multiple (empty) ProDOS volumes. Copy other images, if you like. The card is now ready for use in the AppleIISd. Make sure to eject it properly using the task bar icon. 


If you want the card to be bootable, the first partition has to have a "PRODOS" file and a "*.SYSTEM" file. Here is the link to a bootable image: ProFile.zip

Comments

  1. UnknownMarch 16, 2018 at 3:19 PM

    Hi,

    Will this work on an Apple II Europlus with 64K?

    ReplyDelete
    Replies
    1. bluemeanieMarch 18, 2018 at 8:48 AM

      Hi, at the moment only the IIe enhanced and the IIgs are supported.
      I don't have too much time right now, but it should not be too much work to support all other Apple II systems.

      Delete
  2. bluemeanieJune 8, 2018 at 2:38 PM

    The smallest card size that Ciderpress supports for this approach is 256 MB. The reason is simple: a 128 MB card is not large enough to hold four 32 MB ProDOS volumes, because in reality the card has less than 128 MB. That is why Ciderpress does not give the 4-6 partition CFFA option.

    ReplyDelete

Post a Comment

Popular posts from this blog

Prebuilt AppleIISD V1.2.1 finally available

Image
I haven't posted for a very long time now, but I'm up and well during those strange days (future readers just google the year 2020 😷). The even better news is that since last year I teamed up with Jens who persuaded me to make a new batch of AppleIISD cards, as reported in my previous  post . The cards are available preassembled for 59€ excl. shipping. We are trying to get a website online where you can buy the cards. Meanwhile, you can contact me at the  Applefritter Forum . I still have not found a solution to the EEPROM problem erasing the first byte every now and then. That is why there still is a jumper to enable writing to the chip. However, this needs to be changed only when changing the card's firmware. I am very pleased with this feature as it gives the user a chance to upgrade to a newer firmware version without the need of an EPROM burner. It has been a huge help in development, too when you don't have to extract the chip every minute to burn a new vers
Read more

AppleIISd

Image
For the past few month I have been developing a storage solution for the Apple II that, to my knowledge, hasn't been done before. A SD card as a hard-drive replacement. It is nearly finished and has (hopefully) only minor issues left to fix. I admit, this doesn't sound neither groundbreaking, nor highly complex, but that is not the goal I am aiming for. I wanted to build something for the Apple II for quite some time, because that is what this computer was originally aimed at. It also gave me the chance to learn more about the hardware and internal parts of ProDOS. Finally I wanted to have a cheap mass storage, that may be assembled quite easily from parts that are not too complicated. Of course, there are already lots of devices that have an sd card and you can choose a floppy image like the or are feature stuffed, but i wanted it to be as simple as possible: ProDOS may access the card directly and boot support shall be provided. Luckily, I remembered André Fachat's  S
Read more

AppleIISd V1.2.2 - Silly bugfixes and an improved flasher application

 Thanks to the fact that I could (luckily) continue working through the past year, I haven't had much time at all to do work on the AppleIISd and people have been nagging me to support non-65C02 models as well. In fact, when working from home, I wasn't in the mood to do work on personal projects at all when I've been doing professional work in the same room on the same computer the whole day long. In a brief moment of being inspired, I managed to find a bug that's been haunting me since I introduced the new SMD board design (see my last post on the AppleIISd). The problem was that despite the manufacturers claim for having a power-up write protection, the first byte of the now soldered EEPROM would be erased frequently causing the card to stop working. My manufacturing partner and I did hundreds of On/Off switching tests, monitoring power and data lines. We didn't find anything that would lead us to a solution. I reviewed the VHDL for the CPLD over and over again an
Read more