RetroChallenge 2017/10: Mouse Card replacement for the Apple IIe

This is it, the topic for my first RetroChallenge!
I want to build a replacement for the Apple II Mouse Card. Well, at least a prototype.

Why on earth...?
Just imagine the all the endless possibilities you get from a GUI: it changes the whole experience of computing! Suddenly everyone could use a computer and nobody has to remember and type all those cryptic commands anymore...
To be honest, that's neither really new, nor completely true. But just ignore that for a moment: If you want mouse support on the Apple II series, you have three choices: a IIc/IIc+, a IIgs or the II Mouse Card.
The first choice is compact, but limited. The IIc has no slots (and that is one of my favourite features of the Apple II line). Additionally, a IIc isn't exactly cheap here in Europe.
The second one, a IIgs with its ADB bus is nearly perfect, except that it isn't cheap either.
That leaves us with the third option, the mouse card for the II. The computer itself is quite common and therefore not expensive (of you skip those Sunday evening eBay inanities). Unfortunately, the card and a matching mouse are kind of rare.

Yeah, but who needs that anyway?
Anyone! At least anyone who still uses an Apple II. Still not convinced? Frankly, I don't care. RetroChallenge is about doing things because you can, not because anyone needs it.
So, I'm ready to go and waiting for the challenge to begin. In the few days remaining I could already fantasize about the wonderful things I could do with my IIe when it's finished ;-)

Comments

  1. Robert BednerSeptember 28, 2017 at 11:19 AM

    Nice idea! These cards are rare and really expensive.

    Do you want to connect the original Apple Mouse II (M0100) or a standard serial/USB mouse?
    I read that they have a rotary encoder and transmit a raw signal - that could be an additional challenge to put these two concepts together. ;-)

    ReplyDelete
  2. bluemeanieSeptember 28, 2017 at 12:54 PM

    The original Apple II mouse, just as the original Macintosh mouse are equally rare. I'd like to try a PS/2 mouse first, because this is a rather easy protocol.

    I'll post about these different kinds of mice later.

    ReplyDelete

Post a Comment

Popular posts from this blog

How to prepare SD cards for the AppleIISd

Image
Here is how to prepare SD cards for use with my AppleIISd. Please be aware, that the AppleIISd does not use the FAT format like other SD or CF storage solutions does, it uses the ProDOS format directly. This means that you can not simply take a ProDOS image and drop it to the card in the Windows Explorer, it has to be written using CiderPress. 1. Open CiderPress in Admin mode (Right-click on Icon, "Open as Administrator"). 2. Select "Volume copier" from the icon bar or select "Tools -> Volume copier (open volume)" from the menu. 3. Make sure that "Open as read-only" is deselected. Select the SD card's logical volume from the list. Triple check  that you have selected the correct volume and don't come crying when your PC has only a ProDOS volume left to boot 😉 4. When you open an SD card for the first time like this it might show an MS-DOS volume with SD card's size. This gives you an opportunity to check  again! Select...
Read more

AppleIISd

Image
For the past few month I have been developing a storage solution for the Apple II that, to my knowledge, hasn't been done before. A SD card as a hard-drive replacement. It is nearly finished and has (hopefully) only minor issues left to fix. I admit, this doesn't sound neither groundbreaking, nor highly complex, but that is not the goal I am aiming for. I wanted to build something for the Apple II for quite some time, because that is what this computer was originally aimed at. It also gave me the chance to learn more about the hardware and internal parts of ProDOS. Finally I wanted to have a cheap mass storage, that may be assembled quite easily from parts that are not too complicated. Of course, there are already lots of devices that have an sd card and you can choose a floppy image like the or are feature stuffed, but i wanted it to be as simple as possible: ProDOS may access the card directly and boot support shall be provided. Luckily, I remembered André Fachat's  S...
Read more

IIgs breaktrough

Image
Last night I had a major breakthrough for my SD card interface! Not only does it work, it boots GS/OS on the Apple IIgs! 🎉 Switching the source code from Merlin-8 on the IIe to CC65 in Visual Studio and using an EEPROM sped up my development cycle quite a bit. This wasn't a fix for the issues, of course, but it helped. As usual, there were a lot of small things involved and I have learned some lessons. First lesson: the disk status function uses the X- and Y-registers as return values. However, when you load these registers with the return values and then insert a function call that does not only save these registers but uses them for slot addressing, it will crash. There simply isn't a slot number 255 in the Apple II 😉 Second lesson: SDHC cards use block addressing, not byte addressing. Some weeks ago, my 512 MB card died and I replaced it with an 8 GB card. I knew before that it was initialized correctly, so I assumed it worked as well. The problem was b...
Read more